Medium
PK 13.501 SLD 1
- Go back
- Home
- Products
- Loader Cranes
- Models
- PK 13.501 SLD 1
PK 13.501 SLD 1
WELL-ENGINEERED HYDRAULIC- AND ELECTRONIC SYSTEMS
- More power in the hook due to Single Link Plus
- Higher payloads due to intelligent lightweight design
- Shorter load cycle times due to High Speed Extention
High Speed Extension
The High Speed Extension is a standard feature on PALFINGER loader cranes. Also referred to as Return Oil Utilization, this feature is a regenerative hydraulic circuit for the extension booms. It speeds up the boom extend and retract functions by up to 30%.
Single Link Plus
The knuckle joint on the crane's knuckle boom improves the crane's lifting power significantly in typical working positions. This knuckle boom, which has been specially developed by PALFINGER and can be angled upwards, also stands out by virtue of excellent movement geometry. Difficult crane jobs can be performed with precision even in the tightest spaces.
Max. lifting moment | 13.1 mt |
Max. lifting capacity | 6200 kg |
Max. hydraulic outreach | 14.8 m |
Max. manual outreach | 19.0 m |
Slewing angle | 420° |
Slewing torque | 1.6 mt |
Stabilizer spread (std) | 5.0 m |
Fitting space required (std) | 0.74 m |
Width folded | 2.50 m |
Max. operating pressure | 330 bar |
Pump capacity | 35 - 50 l/min |
Dead weight (std) | 1510 kg |
Cranes shown in the leaflet are partially optional equipped and do not always correspond to the standard version.
Country-specific regulations must be observed. Dimensions may vary. Subject to technical changes, errors and translation mistakes.
Lifting moment (mt) | Outreach (m) | Slewing angle (°) | Slewing torque (mt) | Pressure (MPa) | Pump capacity (l/min) | Crane Weight (kg) | Crane Height (mm) | Crane Width (mm) | Installation Width (mm) | |
---|---|---|---|---|---|---|---|---|---|---|
13.1 | 6.1 | 420 | 1.6 | 33.0 | 35-50 | - | 2215 | 2500 | 740 | |
12.7 | 8.2 | 420 | 1.6 | 33.0 | 35-50 | 1660 | 2215 | 2500 | 740 | |
12.3 | 10.4 | 420 | 1.6 | 33.0 | 35-50 | 1780 | 2215 | 2500 | 740 | |
12.0 | 12.6 | 420 | 1.6 | 33.0 | 35-50 | 1880 | 2215 | 2500 | 740 | |
11.7 | 14.8 | 420 | 1.6 | 33.0 | 35-50 | 1980 | 2215 | 2500 | 800 |
The outreaches stated are with a boom angle of 20° and are therefore not the maximum. When using mechanical boom extensions, the loads shown on the charts need to be reduced by the weight of these extensions.
Brochures
You are currently on the PALFINGER Middle East page which shows the corresponding product assortment. We noticed that you come from a different location. Do you want to change to another PALFINGER country page?