Light
PK 7.001K SLD 3
- Go back
- Home
- Products
- Loader Cranes
- Models
- PK 7.001K SLD 3
PK 7.001K SLD 3
- Shorter load cycle times due to High Speed Extention
- Maximum utilisation of the working range due to HPSC
- Higher payloads due to intelligent lightweight design
Images & Videos
Paltronic
With the PALTRONIC, PALFINGER offers the latest control electronics for the series production crane. Different systems are available depending on the series and the range of functions. The most important safety and comfort functions include such as overload protection and different variations of the stability control system HPSC and High Power Lifting System HPLS.
High Speed Extension
The High Speed Extension is a standard feature on PALFINGER loader cranes. Also referred to as Return Oil Utilization, this feature is a regenerative hydraulic circuit for the extension booms. It speeds up the boom extend and retract functions by up to 30%.
Single Link
The knuckle joint significantly improves the crane’s motion geometry.
Max. lifting moment | 6.2 mt |
Max. lifting capacity | 3300 kg |
Max. hydraulic outreach | 8.8 m |
Max. manual outreach | 12.4 m |
Slewing angle | 400° |
Slewing torque with 1 gear | 0.8 mt |
Stabilizer spread (std) | 3.0 m |
Fitting space required (std) | 0.66 m |
Width folded | 2.20 m |
Max. operating pressure | 330 bar |
Pump capacity | 30 l/min |
Dead weight (std) | 735 kg |
Cranes shown in the leaflet are partially optional equipped and do not always correspond to the standard version.
Country-specific regulations must be observed. Dimensions may vary. Subject to technical changes, errors and translation mistakes.
Lifting moment (mt) | Outreach (m) | Slewing angle (°) | Slewing torque (mt) | Pressure (MPa) | Pump capacity (l/min) | Crane Weight (kg) | Crane Height (mm) | Crane Width (mm) | Installation Width (mm) | |
---|---|---|---|---|---|---|---|---|---|---|
6.2 | 5.0 | 400 | 0.8 | 33.0 | 30 | 735 | 1930 | 2200 | 660 | |
6.0 | 6.9 | 400 | 0.8 | 33.0 | 30 | 815 | 1930 | 2200 | 660 | |
5.8 | 8.8 | 400 | 0.8 | 33.0 | 30 | 885 | 1930 | 2200 | 660 |
The outreaches stated are with a boom angle of 20° and are therefore not the maximum. When using mechanical boom extensions, the loads shown on the charts need to be reduced by the weight of these extensions.
Brochures
You are currently on the PALFINGER Middle East page which shows the corresponding product assortment. We noticed that you come from a different location. Do you want to change to another PALFINGER country page?