Light

PK 7.501K SLD 5

  1. Go back
  2. Home
  3. Products
  4. Loader Cranes
  5. Models
  6. PK 7.501K SLD 5

PK 7.501K SLD 5

Loader Crane

POWERFUL PARTNER FOR MUNICIPAL JOBS

  • High operator friendliness thanks to radio remote control 
  • Maximum utilisation of the working range due to HPSC 
  • More lifting power due to A-HPLS 
  • Higher payloads due to intelligent lightweight design
Downloads Technical Data

High Power Lifting System

The PALFINGER High Power Lifting System (E-HPLS, A-HPLS or S-HPLS) increases the capacity of the crane by up to 15% while reducing working speed. E-HPLS can be activated manually for the occasional manipulation of very heavy loads. A-HPLS as well as S-HPLS are activated fully automatically. There is continuous activation depending on the power required.

Details

Paltronic

With the PALTRONIC, PALFINGER offers the latest control electronics for the series production crane. Different systems are available depending on the series and the range of functions. The most important safety and comfort functions include such as overload protection and different variations of the stability control system HPSC and High Power Lifting System HPLS.

Details

High Speed Extension

The High Speed Extension is a standard feature on PALFINGER loader cranes. Also referred to as Return Oil Utilization, this feature is a regenerative hydraulic circuit for the extension booms. It speeds up the boom extend and retract functions by up to 30%.

Single Link

The knuckle joint significantly improves the crane’s motion geometry. 

Max. lifting moment 6.9 mt
Max. lifting capacity 3300 kg
Max. hydraulic outreach 8.8 m
Slewing angle 400°
Slewing torque 0.8 mt
Stabilizer spread (std) 3.0 m
Max. operating pressure 360 bar
Pump capacity 30 - 40 l/min
Dead weight (std) 765 kg

Cranes shown in the leaflet are partially optional equipped and do not always correspond to the standard version.
Country-specific regulations must be observed. Dimensions may vary. Subject to technical changes, errors and translation mistakes.

Lifting moment
(mt) 		Outreach
(m) 		Slewing angle
(°) 		Slewing torque
(mt) 		Pressure
(MPa) 		Pump capacity
(l/min) 		Crane Weight
(kg) 		Crane Height
(mm) 		Crane Width
(mm) 		Installation Width
(mm)
6.9 5.0 400 0.8 36.0 30 - 40 765 1930 2200 660
6.6 6.9 400 0.8 36.0 30 - 40 845 1930 2200 660
6.5 8.8 400 0.8 36.0 30-40 915 1930 2200 660

The outreaches stated are with a boom angle of 20° and are therefore not the maximum. When using mechanical boom extensions, the loads shown on the charts need to be reduced by the weight of these extensions.

Downloads

Brochures

PK 7.001 K SLD 3 / PK 7.501 K SLD 5

1,66 MB Download

CRANE TOOLS

18,4 MB Download