Multi

HT 660

Tandem Axle

Hooklift

Imperial Metric

Hook Height 54" | 61 ¾"

Container Length 16 – 22 ft

Min GVWR 66,000 lbs.

Technical Data

Experience the next generation of heavy-duty hookloaders designed specifically for the North American market. Engineered with a focus on safety, comfort, and durability, the HT 660 is set to redefine your hauling experience.

This model features a telescoping (54 or 61 ¾ inch) jib with dual main cylinders.

66,000 lbs. capacity for HT 660

Downloads

PRO ACTIVE DRIVE (PAD) REMOTE CONTROL

Intuitive and interactive remote control designed for complete cab comfort, allowing the operator to load and unload containers without leaving the cab.

Customizable to accommodate single operational add-ons such as tarper, salt spreader, and snow plow, ensuring a seamless workflow.

Optional Features:

Automatic Cycle: Effortlessly load and unload with a single joystick push.
Rapid Motion: Enjoy a 30% increase in extension speed for empty containers.

REMOVABLE & ADJUSTABLE CONTAINER SLIDES

Easily adjust the container slides to accommodate various container lengths, providing flexibility for your hauling needs.
Standard container rests are constructed with full-cast steel, ensuring long-lasting performance and stability.
Softsliding container rests feature highly abrasion-resistant plastic guide pads, which result in smoother movements, reduced noise, and minimize wear on container rails.

NEW SUBFRAME DESIGN

The new subframe design increases stability, especially in tipping operations.

X-Beam provides increased resistance against chassis torsion, increasing the vehicle's lifetime
Front Cross Beam reduces the risk of interference with truck engine or gearbox components
Improved Mid-Cross Beam Design
Stronger Rear Cross Beam Design

Helper Cylinders

A pair of helper cylinders mounted to the subframe provides extra vertical force.
Reduces structural stress, extending equipment lifespan.
Enables tipping of heavy containers without sliding them backward.
Eliminates the need to slide containers before tipping, enhancing convenience

Highlights

LOW PROFILE BOGIE SYSTEM

A more compact rear bogie design allows for a reduced transport height, resulting in enhanced stability for the load and increased safety and comfort for the operator.

HYDRAULIC ADJUSTABLE BUMPER

Enables the hoist to legally haul 24’ containers, providing operators with an additional 2’ of cargo space for their transportation needs.

IMPROVED HOOKARM DESIGN

Features an enhanced hook arm design, offering greater strength for easier hook height adjustment, smoother engagement with container bars, and increased safety.

A new safety latch ensures secure locking of the container baler into the hook, preventing any bouncing or accidental disengagement.
The addition of a new casted corner part with an integrated rubber buffer provides a dedicated touchpoint for the container, enhancing durability and reducing wear.
With a hook height adjustment range of 54” to 61 3/4”, facilitated by a new mechanical stop, achieving the desired hook height is now simpler and more precise.

ADJUSTABLE LOCK SYSTEM

Features ANSI hold-down brackets that can be adjusted to a range of 30 inches. This enhances safety and improves compatibility with non-ANSI conforming bins, ensuring a secure fit regardless of bin type.

	Lift / DumpCapacity (lb.)	CA Range (in.)	Min. GVWR (lb.)	Min RBM (in. lb.)	Hooklift length	Clear Frame Rail (in.)	Body Length Range (ft.)	Optimum Body Lenghts (ft.)	Jib Height (in.)	Jib Action	Max. Dump Angle	Pivot	# of Lift / Dump Cylinders	Operating Pressure (PSI)	Pump Type	Fitting Hoses	Shipping Weight (lb.)	Paint	Construction
	60000	185-195"	66000	N/A	237	242	16-22'	20-22'	54'' & 61.75''	Telescopic	50 degrees	Dual	2/2	4500	Piston - Direct mount	JIC/SAE	5830	Finish Coat	A514 (T-1)
	60000	205-215"	66000	N/A	266	271	19-24'	21-24'	54'' & 61.75''	Telescopic	47 degrees	Dual	2/2	4500	Piston - Direct mount	JIC/SAE	6050	Finish Coat	A514 (T-1)

	Lift / DumpCapacity (lb.)	CA Range (in.)	Min. GVWR (lb.)	Min RBM (in. lb.)	Hooklift length	Clear Frame Rail (in.)	Body Length Range (ft.)	Optimum Body Lenghts (ft.)	Jib Height (in.)	Jib Action	Max. Dump Angle	Pivot	# of Lift / Dump Cylinders	Operating Pressure (PSI)	Pump Type	Fitting Hoses	Shipping Weight (lb.)	Paint	Construction
	27216	185-195"	66000	N/A	602	615	4.88-6.70 m	6.10-6.71 m	137.16 cm & 156.8 cm	Telescopic	50 degrees	Dual	2/2	310	Piston - Direct mount	JIC/SAE	2645	Finish Coat	A514 (T-1)
	27216	205-215"	66000	N/A	676	688	5.79-7.31 m	6.40-7.32 m	137.16 cm & 156.8 cm	Telescopic	47 degrees	Dual	2/2	310	Piston - Direct mount	JIC/SAE	2745	Finish Coat	A514 (T-1)

Dual Pivot Design
- Flexible design with true dumping capabilities

High Pressure Hydraulics (3,600 psi to 4,500 psi)
- Allows system to take advantage of smaller cylinders, sving you weight and increases your available payload.
Container Hold Downs
- Inside on T-12, PHT-16, and T-20 models
- Outside on all other models
  - Adjustable (forward and back) on PHT-22
Dual Lift/Dump Cylinders
- Steady and secure handling of bodies during loading, unloading and dumping operations
Dual Counter Balance Valves
- Safety feature providing power up and power down
- Accessible and serviceable
Dual Rear Rollers standard on T-40 models and up
Soft Stop Landing standard on T-29 and up
Telescopic jib
High strength steel supports
- No wearable/replaceable pads
Adjustable Height Jib
- Hydraulic optional on T-29S, T29-M - 36" and 54"
- Manual standard on T-40 and up - 54" and 62"
Inside Controls
Greasable with bronze bushings at all pviot points
High strength steel frame - Z rail design
Safety sensors
- Jib sensor ensures the jib cannot retract while in dump mode (all models)
- Dump latch sensor ensures the latches are fully engated (all models)
- Soft stop sensor ensures gentle landing of body after dumping (T-29 and up)
3-Year Limited Warranty

Downloads

Brochures

Select language...

Container Solutions

11,32 MB Download