Knuckle Boom

PK 11.001 SLD 1

  1. Go back
  2. Home
  3. Products
  4. Knuckle Boom Cranes
  5. Models
  6. PK 11.001 SLD 1

PK 11.001 SLD 1

Knuckle Boom Crane
Imperial Metric
Max Lifting Moment 74,780 ft lbs
Max Lifting Capacity 12570 lb
Max Hydraulic Outreach 39' 6''
Technical Data

SINGLE LINK AND PERFECT POWER TO WEIGHT RATIO OFFER EFFICIENT LOAD HANDLING

  • More power on the hook due to Single Link
  • Higher payloads due to intelligent lightweight design
  • Perfect appearance and the highest value retention due to coating technology
Downloads

High Speed Extension

The High Speed Extension is a standard feature on PALFINGER loader cranes. Also referred to as Return Oil Utilization, this feature is a regenerative hydraulic circuit for the extension booms. It speeds up the boom extend and retract functions by up to 30%.

Single Link

The knuckle joint significantly improves the crane’s motion geometry. 

Max. lifting moment 74780.0 ft_lbs
Max. lifting capacity 12570 lb
Max. hydraulic outreach 39' 6''
Max. manual outreach 53'
Slewing angle 400°
Slewing torque 9370.0 ft_lbs
Stabilizer spread (std) 16'
Fitting space required (std) 2' 4''
Width folded 7' 7''
Max. operating pressure 4785 psi
Pump capacity 7.9 - 11.9 gpm
Dead weight (std) 2510 lbs

Cranes shown in the leaflet are partially optional equipped and do not always correspond to the standard version.
Country-specific regulations must be observed. Dimensions may vary. Subject to technical changes, errors and translation mistakes.

Max. lifting moment 10.3 mt
Max. lifting capacity 5700 kg
Max. hydraulic outreach 12.0 m
Max. manual outreach 15.9 m
Slewing angle 400°
Slewing torque 1.3 mt
Fitting space required (std) 1.30 m
Width folded 2.32 m
Max. operating pressure 330 bar
Pump capacity 30 - 45 l/min
Dead weight (std) 1140 kg

Cranes shown in the leaflet are partially optional equipped and do not always correspond to the standard version.
Country-specific regulations must be observed. Dimensions may vary. Subject to technical changes, errors and translation mistakes.

Lifting moment
(ft_lbs) 		Outreach Slewing angle
(°) 		Slewing torque
(ft_lbs) 		Pressure
(psi) 		Pump capacity
(gpm) 		Crane Weight
(lbs) 		Crane Height
(inch) 		Crane Width
(inch) 		Installation Width
(inch)
74521.0 - 400 9370 4785.0 7.9 - 11.9 2510 83.07 94.49 27.56
72350.0 40' 400 9370 4785.0 7.9 - 11.9 2760 83.07 94.49 27.56
69456.0 46' 400 9370 4785.0 7.9 - 11.9 2980 83.07 94.49 27.56
67286.0 53' 400 9370 4785.0 7.9 - 11.9 3200 83.07 94.49 27.56
Lifting moment
(mt) 		Outreach
(m) 		Slewing angle
(°) 		Slewing torque
(mt) 		Pressure
(MPa) 		Pump capacity
(l/min) 		Crane Weight
(kg) 		Crane Height
(mm) 		Crane Width
(mm) 		Installation Width
(mm)
10.3 5.8 400 1.3 33.0 30-45 1140 2110 2400 720
10.0 7.8 400 1.3 33.0 30-45 1250 2110 2400 720
9.7 9.9 400 1.3 33.0 30-45 1350 2110 2400 720
9.5 12.0 400 1.3 33.0 30-45 1450 2110 2400 720

The outreaches stated are with a boom angle of 20° and are therefore not the maximum. When using mechanical boom extensions, the loads shown on the charts need to be reduced by the weight of these extensions.

Downloads

Brochures

PK 11.001 SLD 1 / PK 12.001 SLD 3 / PK 11.001 SLD 3 / PK 12.501 SLD 5

3,36 MB Download