Knuckle Boom

PK 13.501 SLD 3

  1. Go back
  2. Home
  3. Products
  4. Knuckle Boom Cranes
  5. Models
  6. PK 13.501 SLD 3

PK 13.501 SLD 3

Knuckle Boom Crane
Imperial Metric
Max Lifting Moment 94,960 ft lbs
Max Lifting Capacity 13700 lb
Max Hydraulic Outreach 48' 7''
Technical Data

WELL-ENGINEERED HYDRAULIC- AND ELECTRONIC SYSTEMS

  • More power in the hook due to Single Link Plus
  • Maximum utilisation of the working range due to HPSC
  • Shorter load cycle times due to High Speed Extention
  • Maximum reliability due to Paltronic
Downloads

Paltronic

With the PALTRONIC, PALFINGER offers the latest control electronics for the series production crane. Different systems are available depending on the series and the range of functions. The most important safety and comfort functions include such as overload protection and different variations of the stability control system HPSC and High Power Lifting System HPLS.

Details

High Speed Extension

The High Speed Extension is a standard feature on PALFINGER loader cranes. Also referred to as Return Oil Utilization, this feature is a regenerative hydraulic circuit for the extension booms. It speeds up the boom extend and retract functions by up to 30%.

Single Link Plus

The knuckle joint on the crane's knuckle boom improves lifting power significantly in typical working positions. Developed by PALFINGER, this knuckle boom can be angled upwards providing excellent movement geometry. Difficult crane jobs can be performed with precision even in the tightest spaces.

Max. lifting moment 94960.0 ft_lbs
Max. lifting capacity 13700 lb
Max. hydraulic outreach 48' 7''
Max. manual outreach 62' 4"
Slewing angle 420°
Slewing torque 11580.0 ft_lbs
Stabilizer spread (std) 16' 5''
Fitting space required (std) 2' 5''
Width folded 8' 2''
Max. operating pressure 4785 psi
Pump capacity 9.2 - 13.2 gpm
Dead weight (std) 3330 lbs

Cranes shown in the leaflet are partially optional equipped and do not always correspond to the standard version.
Country-specific regulations must be observed. Dimensions may vary. Subject to technical changes, errors and translation mistakes.

Max. lifting moment 13.1 mt
Max. lifting capacity 6200 kg
Max. hydraulic outreach 14.8 m
Max. manual outreach 19.0 m
Slewing angle 420°
Slewing torque 1.6 mt
Stabilizer spread (std) 5.0 m
Fitting space required (std) 0.74 m
Width folded 2.50 m
Max. operating pressure 330 bar
Pump capacity 35 - 50 l/min
Dead weight (std) 1510 kg

Cranes shown in the leaflet are partially optional equipped and do not always correspond to the standard version.
Country-specific regulations must be observed. Dimensions may vary. Subject to technical changes, errors and translation mistakes.

Lifting moment
(ft_lbs) 		Outreach Slewing angle
(°) 		Slewing torque
(ft_lbs) 		Pressure
(psi) 		Pump capacity
(gpm) 		Crane Weight
(lbs) 		Crane Height
(inch) 		Crane Width
(inch) 		Installation Width
(inch)
94779.0 - 420 11580 4785.0 9.2 - 13.2 3330 87.2 100.39 29.13
91885.0 41' 420 11580 4785.0 9.2 - 13.2 3660 87.2 100.39 29.13
88991.0 49' 420 11580 4785.0 9.2 - 13.2 3920 87.2 100.39 29.13
86820.0 56' 420 11580 4785.0 9.2 - 13.2 4150 87.2 100.39 29.13
84650.0 62' 420 11580 4785.0 9.2 - 13.2 4370 87.2 100.39 29.13
Lifting moment
(mt) 		Outreach
(m) 		Slewing angle
(°) 		Slewing torque
(mt) 		Pressure
(MPa) 		Pump capacity
(l/min) 		Crane Weight
(kg) 		Crane Height
(mm) 		Crane Width
(mm) 		Installation Width
(mm)
13.1 6.1 420 1.6 33.0 35-50 1510 2215 2550 740
12.7 8.2 420 1.6 33.0 35-50 1660 2215 2550 740
12.3 10.4 420 1.6 33.0 35-50 1780 2215 2550 740
12.0 12.6 420 1.6 33.0 35-50 1880 2215 2550 740
11.7 14.8 420 1.6 33.0 35-50 1980 2215 2550 800

The outreaches stated are with a boom angle of 20° and are therefore not the maximum. When using mechanical boom extensions, the loads shown on the charts need to be reduced by the weight of these extensions.

Downloads

Brochures

PK 13.501 SLD 1 | PK 14.001 SLD 3 PK 13.501 SLD 3 | PK 14.501 SLD 5

4,06 MB Download

CRANE TOOLS

18,4 MB Download