Knuckle Boom
PK 1050 TEC
PK 1050 TEC
Loader Crane
- More intelligent operation with PALTRONIC 180 control electronics
- Extra smooth control thanks to LX-6 control valve
- Very stiff and light boom system thanks to P-Profile
- More efficient and faster due to continuous slewing system
- High user friendliness due to in-house developed radio remote control PALcom P7
- More efficiency with fly jib due to DPS-C
- Maximum utilisation of the working range thanks to extended HPSC
- More lifting power due to S-HPLS
- Practical and attractive due to Functional Design
| Max. lifting moment | 95.0 mt |
| Max. lifting capacity | 30000 kg |
| Max. hydraulic outreach | 22.4 m |
| Slewing angle | ∞ |
| Slewing torque with 2 gears | 9.1 mt |
| Stabilizer spread (std) | 8.8 m |
| Fitting space required (std) | 1.72 m |
| Width folded | 2.55 m |
| Max. operating pressure | 385 bar |
| Pump capacity | 2 x 100 - 130 l/min |
| Dead weight (std) | 7480 kg |
Cranes shown in the leaflet are partially optional equipped and do not always correspond to the standard version.
Country-specific regulations must be observed. Dimensions may vary. Subject to technical changes, errors and translation mistakes.
Lifting moment (mt) |
Outreach (m) |
Slewing angle (°) |
Slewing torque (mt) |
Pressure (MPa) |
Pump capacity (l/min) |
Crane Weight (kg) |
Crane Height (mm) |
Crane Width (mm) |
Installation Width (mm) |
|
|---|---|---|---|---|---|---|---|---|---|---|
| 92.9 | 9.0 | ∞ | 9.1 | 38.5 | 2x 100-130 | 7483 | 2530 | 2550 | 1720 | |
| 90.6 | 10.9 | ∞ | 9.1 | 38.5 | 2x 100-130 | 7817 | 2530 | 2550 | 1720 | |
| 88.7 | 15.2 | ∞ | 9.1 | 38.5 | 2x 100-130 | 8440 | 2530 | 2550 | 1815 | |
| 87.8 | 17.5 | ∞ | 2.5 | 38.5 | 2x 100-130 | 8735 | 2530 | 2550 | 1815 | |
| 87.2 | 19.9 | ∞ | 9.1 | 38.5 | 2x 100-130 | 8983 | 2530 | 2550 | 1900 | |
| 84.5 | 22.4 | ∞ | 9.1 | 38.5 | 2x 100-130 | 9208 | 2530 | 2550 | 1900 |
The outreaches stated are with a boom angle of 20° and are therefore not the maximum. When using mechanical boom extensions, the loads shown on the charts need to be reduced by the weight of these extensions.
