Medium

PK 12002 EH High Performance

  1. Go back
  2. Home
  3. Products
  4. Loader Cranes
  5. Models
  6. PK 12002 EH High Performance

PK 12002 EH High Performance

Loader Crane

The compact design and Power Link Plus are attribues for efficiency and cost effectiveness

  • Maximum precision and safety due to optional AOS
  • High value retention thanks to coating technology
  • Maximum reliability due to PAL 50
  • High operator friendliness thanks to optional radio remote control
  • Additional applications with Power Link Plus
Downloads Technical Data

High Power Lifting System

The PALFINGER High Power Lifting System (E-HPLS, A-HPLS or S-HPLS) increases the capacity of the crane by up to 15% while reducing working speed. E-HPLS can be activated manually for the occasional manipulation of very heavy loads. A-HPLS as well as S-HPLS are activated fully automatically. There is continuous activation depending on the power required.

Details

Low-maintenance extension system

With sliding elements made of synthetic material and the high-quality KTL coating, this boom system significantly simplifies service performed by the operator. This saves time and money – and protects the environment.

Power Link Plus

The PALFINGER Power Link Plus system is a double linkage system with a linkage on the knuckle boom and a linkage between the main boom and crane column. With the 15 degree reverse linkage system, reaching through low door openings or working inside buildings is no problem.

Details

High Speed Extension

The High Speed Extension is a standard feature on PALFINGER loader cranes. Also referred to as Return Oil Utilization, this feature is a regenerative hydraulic circuit for the extension booms. It speeds up the boom extend and retract functions by up to 30%.

Max. lifting moment 11.0 mt
Max. lifting capacity 5700 kg
Max. hydraulic outreach 14.1 m
Slewing angle 400°
Slewing torque 1.3 mt
Stabilizer spread (std) 3.2 m
Fitting space required (std) 0.70 m
Width folded 2.33 m
Max. operating pressure 350 bar
Pump capacity 45 - 60 l/min
Dead weight (std) 1158 kg

Cranes shown in the leaflet are partially optional equipped and do not always correspond to the standard version.
Country-specific regulations must be observed. Dimensions may vary. Subject to technical changes, errors and translation mistakes.

Lifting moment
(mt) 		Outreach
(m) 		Slewing angle
(°) 		Slewing torque
(mt) 		Pressure
(MPa) 		Pump capacity
(l/min) 		Crane Weight
(kg) 		Crane Height
(mm) 		Crane Width
(mm) 		Installation Width
(mm)
11.0 5.8 400 1.3 35.0 45 - 60 1158 2150 2325 700
10.7 7.7 400 1.3 35.0 45-60 1268 2150 2325 700
10.4 9.9 400 1.3 35.0 45-60 1384 2150 2325 700
10.1 12.0 400 1.3 35.0 45-60 1489 2150 2330 700
9.8 14.1 400 1.3 35.0 45-60 1585 2150 2380 735

The outreaches stated are with a boom angle of 20° and are therefore not the maximum. When using mechanical boom extensions, the loads shown on the charts need to be reduced by the weight of these extensions.

Downloads

Brochures

PK 11002 / PK 12002 EH

2,06 MB Download

CRANE TOOLS

18,4 MB Download