Knuckle Boom
PK 7.501 SLD 5
PK 7.501 SLD 5
Knuckle Boom Crane
| Max. lifting moment | 49.3 ft lbs |
| Max. lifting capacity | 7300 lb |
| Max. hydraulic outreach | 36' 9'' |
| Max. manual outreach | 41' 12" |
| Slewing angle | 400° |
| Slewing torque | 5.8 ft lbs |
| Stabilizer spread (std) | 9' 10'' |
| Fitting space required (std) | 2' 2'' |
| Width folded | 7' 3'' |
| Max. operating pressure | 5.22 psi |
| Pump capacity | 7.9 - 10.6 gpm |
| Dead weight (std) | 1.72 lbs |
Cranes shown in the leaflet are partially optional equipped and do not always correspond to the standard version.
Country-specific regulations must be observed. Dimensions may vary. Subject to technical changes, errors and translation mistakes.
| Max. lifting moment | 6.8 mt |
| Max. lifting capacity | 3300 kg |
| Max. hydraulic outreach | 11.2 m |
| Max. manual outreach | 12.9 m |
| Slewing angle | 400° |
| Slewing torque | 0.8 mt |
| Stabilizer spread (std) | 3.0 m |
| Fitting space required (std) | 0.66 m |
| Width folded | 2.20 m |
| Max. operating pressure | 360 bar |
| Pump capacity | 30 - 40 l/min |
| Dead weight (std) | 780 kg |
Cranes shown in the leaflet are partially optional equipped and do not always correspond to the standard version.
Country-specific regulations must be observed. Dimensions may vary. Subject to technical changes, errors and translation mistakes.
Lifting moment (ft_lbs) |
Outreach |
Slewing angle (°) |
Slewing torque (ft_lbs) |
Pressure (psi) |
Pump capacity (gpm) |
Crane Weight (lbs) |
Crane Height (inch) |
Crane Width (inch) |
Installation Width (inch) |
|
|---|---|---|---|---|---|---|---|---|---|---|
| Std | - | - | 400 | - | - | 7.9-10.6 | - | - | - | - |
| A | - | - | 400 | - | - | 7.9-10.6 | - | - | - | - |
| B | - | - | 400 | - | - | 7.9-10.6 | - | - | - | - |
| C | - | - | 400 | - | - | 7.9-10.6 | - | - | - | - |
|
Lifting moment (mt) |
Outreach (m) |
Slewing angle (°) |
Slewing torque (mt) |
Pressure (MPa) |
Pump capacity (l/min) |
Crane Weight (kg) |
Crane Height (mm) |
Crane Width (mm) |
Installation Width (mm) |
|
|---|---|---|---|---|---|---|---|---|---|---|
| Std | 6.8 | 5.5 | 400 | 0.8 | 36.0 | 30-40 | 780 | 1930 | 2200 | 660 |
| A | 6.6 | 7.4 | 400 | 0.8 | 36.0 | 30-40 | 860 | 1930 | 1930 | 660 |
| B | 6.4 | 9.3 | 400 | 0.8 | 36.0 | 30-40 | 930 | 1930 | 2200 | 660 |
| C | 6.4 | 11.2 | 400 | 0.8 | 36.0 | 30-40 | 930 | 1930 | 2200 | 660 |
The outreaches stated are with a boom angle of 20° and are therefore not the maximum. When using mechanical boom extensions, the loads shown on the charts need to be reduced by the weight of these extensions.
