Medium
PK 23002 SH High Performance
- Go back
- Home
- Products
- Loader Cranes
- Models
- PK 23002 SH High Performance
PK 23002 SH High Performance
Construction sites that are difficult to access and tight schedules. This is where Power Link Plus and the continuous slewing system really deliver.
- High value retention thanks to coating technology
- More comfort and safety due to Soft Stop
- Maximum utilisation of the working range due to HPSC
- More lifting power due to S-HPLS
- More efficient and faster due to continuous slewing
Images & Videos
Continuous Slewing System
The PALFINGER Continuous Slewing Mechanism permits an unrestricted radius of action. The crane is rotated or 'slewed' using a gear box and hydraulic motor instead of a rack and pinion system. All endless slewing mechanisms come as standard with a high quality roller ball bearing.
Low-maintenance extension system
With sliding elements made of synthetic material and the high-quality KTL coating, this boom system significantly simplifies service performed by the operator. This saves time and money – and protects the environment.
Power Link Plus
The PALFINGER Power Link Plus system is a double linkage system with a linkage on the knuckle boom and a linkage between the main boom and crane column. With the 15 degree reverse linkage system, reaching through low door openings or working inside buildings is no problem.
High Power Lifting System
The PALFINGER High Power Lifting System (E-HPLS, A-HPLS or S-HPLS) increases the capacity of the crane by up to 15% while reducing working speed. E-HPLS can be activated manually for the occasional manipulation of very heavy loads. A-HPLS as well as S-HPLS are activated fully automatically. There is continuous activation depending on the power required.
Soft Stop
The Soft Stop function is an electronic limit position damper. It causes gentle braking of all crane movements before the limit position is reached. Hence, jerky movements and load impacts can be avoided. The crane can be operated more gently and precisely.
Max. lifting moment | 21.9 mt |
Max. lifting capacity | 6200 kg |
Max. hydraulic outreach | 17.1 m |
Max. manual outreach | 19.1 m |
Max. outreach (with fly jib) | 25.2 m |
Slewing angle | ∞ |
Slewing torque with 1 gear | 2.3 mt |
Stabilizer spread (std) | 5.6 m |
Fitting space required (std) | 0.99 m |
Width folded | 2.55 m |
Max. operating pressure | 365 bar |
Pump capacity | 75 - 100 l/min |
Dead weight (std) | 2549 kg |
Cranes shown in the leaflet are partially optional equipped and do not always correspond to the standard version.
Country-specific regulations must be observed. Dimensions may vary. Subject to technical changes, errors and translation mistakes.
Lifting moment (mt) | Outreach (m) | Slewing angle (°) | Slewing torque (mt) | Pressure (MPa) | Pump capacity (l/min) | Crane Weight (kg) | Crane Height (mm) | Crane Width (mm) | Installation Width (mm) | |
---|---|---|---|---|---|---|---|---|---|---|
21.2 | 8.2 | ∞ | 2.3 | 36.5 | 75-100 | 2549 | 2330 | 2550 | 985 | |
20.7 | 10.4 | ∞ | 2.3 | 36.5 | 75-100 | 2717 | 2330 | 2550 | 985 | |
20.3 | 12.6 | ∞ | 2.3 | 36.5 | 75-100 | 2852 | 2330 | 2550 | 1050 | |
20.0 | 14.9 | ∞ | 2.3 | 36.5 | 75-100 | 2976 | 2330 | 2550 | 1095 | |
19.6 | 17.1 | ∞ | 2.3 | 36.5 | 75-100 | 3093 | 2330 | 2550 | 1095 |
The outreaches stated are with a boom angle of 20° and are therefore not the maximum. When using mechanical boom extensions, the loads shown on the charts need to be reduced by the weight of these extensions.
Brochures
You are currently on the PALFINGER Europe page which shows the corresponding product assortment. We noticed that you come from a different location. Do you want to change to another PALFINGER country page?