Medium
PK 26002 EH High Performance
- Go back
- Home
- Products
- Loader Cranes
- Models
- PK 26002 EH High Performance
PK 26002 EH High Performance
The E-HPLS and the enormous reach opens up a wide range of applications
- More efficiency with fly jib due to DPS Plus
- Perfect appearance and the highest value retention due to coating technology
- Additional applications with Power Link Plus
- Increased operating times due to low-maintenance extension system
- High operator friendliness thanks to optional radio remote control
Images & Videos
High Power Lifting System
The PALFINGER High Power Lifting System (E-HPLS, A-HPLS or S-HPLS) increases the capacity of the crane by up to 15% while reducing working speed. E-HPLS can be activated manually for the occasional manipulation of very heavy loads. A-HPLS as well as S-HPLS are activated fully automatically. There is continuous activation depending on the power required.
Low-maintenance extension system
With sliding elements made of synthetic material and the high-quality KTL coating, this boom system significantly simplifies service performed by the operator. This saves time and money – and protects the environment.
Power Link Plus
The PALFINGER Power Link Plus system is a double linkage system with a linkage on the knuckle boom and a linkage between the main boom and crane column. With the 15 degree reverse linkage system, reaching through low door openings or working inside buildings is no problem.
High Speed Extension
The High Speed Extension is a standard feature on PALFINGER loader cranes. Also referred to as Return Oil Utilization, this feature is a regenerative hydraulic circuit for the extension booms. It speeds up the boom extend and retract functions by up to 30%.
Max. lifting moment | 24.9 mt |
Max. lifting capacity | 8900 kg |
Max. hydraulic outreach | 21.3 m |
Max. outreach (with fly jib) | 27.2 m |
Slewing angle | 400° |
Slewing torque | 2.8 mt |
Stabilizer spread (std) | 5.0 m |
Fitting space required (std) | 0.96 m |
Width folded | 2.53 m |
Max. operating pressure | 350 bar |
Pump capacity | 75 - 100 l/min |
Dead weight (std) | 2583 kg |
Cranes shown in the leaflet are partially optional equipped and do not always correspond to the standard version.
Country-specific regulations must be observed. Dimensions may vary. Subject to technical changes, errors and translation mistakes.
Lifting moment (mt) | Outreach (m) | Slewing angle (°) | Slewing torque (mt) | Pressure (MPa) | Pump capacity (l/min) | Crane Weight (kg) | Crane Height (mm) | Crane Width (mm) | Installation Width (mm) | |
---|---|---|---|---|---|---|---|---|---|---|
24.2 | 8.1 | 400 | 2.8 | 35.0 | 75-100 | 2583 | 2350 | 2525 | 955 | |
23.6 | 10.2 | 400 | 2.8 | 35.0 | 75-100 | 2764 | 2350 | 2525 | 955 | |
23.1 | 12.4 | 400 | 2.8 | 35.0 | 75-100 | 2943 | 2350 | 2525 | 1030 | |
22.6 | 14.6 | 400 | 2.8 | 35.0 | 75-100 | 3120 | 2350 | 2525 | 1070 | |
22.1 | 16.8 | 400 | 2.8 | 35.0 | 75-100 | 3266 | 2350 | 2525 | 1105 | |
21.7 | 19.1 | 400 | 2.8 | 35.0 | 75-100 | 3379 | 2350 | 2525 | 1105 | |
21.4 | 21.3 | 400 | 2.8 | 35.0 | 75-100 | 3488 | 2350 | 2525 | 1105 |
The outreaches stated are with a boom angle of 20° and are therefore not the maximum. When using mechanical boom extensions, the loads shown on the charts need to be reduced by the weight of these extensions.
Brochures
You are currently on the PALFINGER Europe page which shows the corresponding product assortment. We noticed that you come from a different location. Do you want to change to another PALFINGER country page?