Heavy

PK 63002 EH High Performance

  1. Go back
  2. Home
  3. Products
  4. Loader Cranes
  5. Models
  6. PK 63002 EH High Performance

PK 63002 EH High Performance

Loader Crane

The continuous slewing system increases the efficiency in use during the crane's entire lifetime.

  • More effcient and faster due to continuous slewing system
  • More lifting power due to E-HPLS
  • Practical and attractive due to Functional Design
  • High value retention thanks to coating technology
Downloads Technical Data

High Power Lifting System

The PALFINGER High Power Lifting System (E-HPLS, A-HPLS or S-HPLS) increases the capacity of the crane by up to 15% while reducing working speed. E-HPLS can be activated manually for the occasional manipulation of very heavy loads. A-HPLS as well as S-HPLS are activated fully automatically. There is continuous activation depending on the power required.

Details

Continuous Slewing System

The PALFINGER Continuous Slewing Mechanism permits an unrestricted radius of action. The crane is rotated or 'slewed' using a gear box and hydraulic motor instead of a rack and pinion system. All endless slewing mechanisms come as standard with a high quality roller ball bearing.

Details

Low-maintenance extension system

With sliding elements made of synthetic material and the high-quality KTL coating, this boom system significantly simplifies service performed by the operator. This saves time and money – and protects the environment.

Power Link Plus

The PALFINGER Power Link Plus system is a double linkage system with a linkage on the knuckle boom and a linkage between the main boom and crane column. With the 15 degree reverse linkage system, reaching through low door openings or working inside buildings is no problem.

Details
Max. lifting moment 59.4 mt
Max. lifting capacity 22000 kg
Max. hydraulic outreach 20.4 m
Max. manual outreach 25.1 m
Max. outreach (with fly jib) 30.4 m
Slewing angle ∞
Slewing torque with 1 gear 4.5 mt
Slewing torque with 2 gears 7.0 mt
Stabilizer spread (std) 8.6 m
Max. operating pressure 350 bar
Pump capacity 80 - 100 l/min
Dead weight (std) 5040 kg

Cranes shown in the leaflet are partially optional equipped and do not always correspond to the standard version.
Country-specific regulations must be observed. Dimensions may vary. Subject to technical changes, errors and translation mistakes.

Lifting moment
(mt) 		Outreach
(m) 		Slewing angle
(°) 		Slewing torque
(mt) 		Pressure
(MPa) 		Pump capacity
(l/min) 		Crane Weight
(kg) 		Crane Height
(mm) 		Crane Width
(mm) 		Installation Width
(mm)
57.2 7.6 ∞ 4.5 / 7.0 35.0 80-100 5040 2450 2550 1555
56.2 9.5 ∞ 4.5 / 7.0 35.0 80-100 5384 2450 2550 1555
55.4 11.5 ∞ 4.5 / 7.0 35.0 80-100 5676 2450 2550 1555
54.5 13.7 ∞ 7.0 35.0 80-100 6096 2450 2550 1555
53.6 15.9 ∞ 7.0 35.0 80-100 6404 2450 2550 1580
53.0 18.1 ∞ 7.0 35.0 80-100 6630 2450 2550 1685
52.6 20.4 ∞ 7.0 35.0 80-100 6804 2450 2550 1685

The outreaches stated are with a boom angle of 20° and are therefore not the maximum. When using mechanical boom extensions, the loads shown on the charts need to be reduced by the weight of these extensions.

Downloads

Brochures

PK 63002 EH

3,36 MB Download

CRANE TOOLS

18,4 MB Download