Knuckle Boom

PK 14.501 SLD 5

  1. Go back
  2. Home
  3. Products
  4. Knuckle Boom Cranes
  5. Models
  6. PK 14.501 SLD 5

PK 14.501 SLD 5

Knuckle Boom Crane
Imperial Metric
Max Lifting Moment 104,990 ft lbs
Max Lifting Capacity 13700 lb
Max Hydraulic Outreach 48' 7''
Technical Data

WELL-ENGINEERED HYDRAULIC- AND ELECTRONIC SYSTEMS

  • More power in the hook due to Single Link Plus
  • High operator friendliness thanks to radio remote control
  • Maximum utilisation of the working range due to HPSC
  • More lifting power due to A-HPLS
  • Higher payloads due to intelligent lightweight design
Downloads

High Power Lifting System

The PALFINGER High Power Lifting System (E-HPLS, A-HPLS or S-HPLS) increases the capacity of the crane by up to 15% while reducing working speed. E-HPLS can be activated manually for the occasional manipulation of very heavy loads. A-HPLS as well as S-HPLS are activated fully automatically. There is continuous activation depending on the power required.

Details

Single Link Plus

The knuckle joint on the crane's knuckle boom improves lifting power significantly in typical working positions. Developed by PALFINGER, this knuckle boom can be angled upwards providing excellent movement geometry. Difficult crane jobs can be performed with precision even in the tightest spaces.

Max. lifting moment 104990.0 ft lbs
Max. lifting capacity 13700 lb
Max. hydraulic outreach 48' 7''
Max. manual outreach 62' 4"
Slewing angle 420°
Slewing torque 11580.0 ft lbs
Stabilizer spread (std) 16' 5''
Fitting space required (std) 2' 5''
Width folded 8' 4''
Max. operating pressure 5220 psi
Pump capacity 13.2 - 18.5 gpm
Dead weight (std) 3400 lbs

Cranes shown in the leaflet are partially optional equipped and do not always correspond to the standard version.
Country-specific regulations must be observed. Dimensions may vary. Subject to technical changes, errors and translation mistakes.

Max. lifting moment 13.2 mt
Max. lifting capacity 6200 kg
Max. hydraulic outreach 11.7 m
Slewing angle 420°
Slewing torque 1.6 mt
Stabilizer spread (std) 5.0 m
Fitting space required (std) 0.74 m
Width folded 2.55 m
Max. operating pressure 330 bar
Pump capacity 50 - 70 l/min
Dead weight (std) 1480 kg

Cranes shown in the leaflet are partially optional equipped and do not always correspond to the standard version.
Country-specific regulations must be observed. Dimensions may vary. Subject to technical changes, errors and translation mistakes.

Lifting moment
(ft_lbs) 		Outreach Slewing angle
(°) 		Slewing torque
(ft_lbs) 		Pressure
(psi) 		Pump capacity
(gpm) 		Crane Weight
(lbs) 		Crane Height
(inch) 		Crane Width
(inch) 		Installation Width
(inch)
104908.0 - 420 - - 13.2 - 18.5 3400 87.2 100.39 29.13
102014.0 41' 420 11580 5220.0 13.2 - 18.5 3730 87.2 100.39 29.13
99120.0 49' 420 11580 5220.0 13.2 - 18.5 3990 87.2 100.39 29.13
96949.0 56' 420 11580 5220.0 13.2 - 18.5 4210 87.2 100.39 29.13
94779.0 62' 420 11580 5220.0 13.2 - 18.5 4430 87.2 100.39 31.5
Lifting moment
(mt) 		Outreach
(m) 		Slewing angle
(°) 		Slewing torque
(mt) 		Pressure
(MPa) 		Pump capacity
(l/min) 		Crane Weight
(kg) 		Crane Height
(mm) 		Crane Width
(mm) 		Installation Width
(mm)
14.5 6.1 420 1.6 36.0 50-70 1540 2215 2550 740
14.1 8.2 420 1.6 36.0 50-70 1690 2215 2550 740
13.7 10.4 420 1.6 36.0 50-70 1810 2215 2550 740
13.4 12.6 420 1.6 36.0 50-70 1910 2215 2550 740
13.1 14.8 420 1.6 36.0 50-70 2010 2215 2550 800

The outreaches stated are with a boom angle of 20° and are therefore not the maximum. When using mechanical boom extensions, the loads shown on the charts need to be reduced by the weight of these extensions.

Downloads

Brochures

PK 13.501 SLD 1 | PK 14.001 SLD 3 PK 13.501 SLD 3 | PK 14.501 SLD 5

4,06 MB Download

CRANE TOOLS

18,4 MB Download