Medium
PK 12.501 SLD 5
- Go back
- Home
- Products
- Loader Cranes
- Models
- PK 12.501 SLD 5
PK 12.501 SLD 5
SINGLE LINK AND PERFECT POWER TO WEIGHT RATIO OFFER EFFICIENT LOAD HANDLING
- More power on the hook due to Single Link
- Higher payloads due to intelligent lightweight design
- Maximum reliability due to PALTRONIC
- High degree of user-friendliness thanks to optional radio remote control
- More lifting power due to A-HPLS
High Power Lifting System
The PALFINGER High Power Lifting System (E-HPLS, A-HPLS or S-HPLS) increases the capacity of the crane by up to 15% while reducing working speed. E-HPLS can be activated manually for the occasional manipulation of very heavy loads. A-HPLS as well as S-HPLS are activated fully automatically. There is continuous activation depending on the power required.
Paltronic
With the PALTRONIC, PALFINGER offers the latest control electronics for the series production crane. Different systems are available depending on the series and the range of functions. The most important safety and comfort functions include such as overload protection and different variations of the stability control system HPSC and High Power Lifting System HPLS.
High Speed Extension
The High Speed Extension is a standard feature on PALFINGER loader cranes. Also referred to as Return Oil Utilization, this feature is a regenerative hydraulic circuit for the extension booms. It speeds up the boom extend and retract functions by up to 30%.
Single Link
The knuckle joint significantly improves the crane’s motion geometry.
Max. lifting moment | 11.4 mt |
Max. lifting capacity | 5700 kg |
Max. hydraulic outreach | 12.0 m |
Max. manual outreach | 15.9 m |
Slewing angle | 400° |
Slewing torque | 1.3 mt |
Stabilizer spread (std) | 3.3 m |
Fitting space required (std) | 0.72 m |
Max. operating pressure | 360 bar |
Pump capacity | 45 - 60 l/min |
Dead weight (std) | 1170 kg |
Cranes shown in the leaflet are partially optional equipped and do not always correspond to the standard version.
Country-specific regulations must be observed. Dimensions may vary. Subject to technical changes, errors and translation mistakes.
Lifting moment (mt) | Outreach (m) | Slewing angle (°) | Slewing torque (mt) | Pressure (MPa) | Pump capacity (l/min) | Crane Weight (kg) | Crane Height (mm) | Crane Width (mm) | Installation Width (mm) | |
---|---|---|---|---|---|---|---|---|---|---|
Std | 11.4 | 5.8 | 400 | 1.3 | 36.0 | 45-60 | 1170 | 2110 | 2400 | 720 |
A | 11.1 | 7.8 | 400 | 1.3 | 36.0 | 45-60 | 1280 | 2110 | 2400 | 720 |
B | 10.8 | 9.9 | 400 | 1.3 | 36.0 | 45-60 | 1380 | 2110 | 2400 | 720 |
C | 10.5 | 12.0 | 400 | 1.3 | 36.0 | 45-60 | 1480 | 2110 | 2400 | 720 |
The outreaches stated are with a boom angle of 20° and are therefore not the maximum. When using mechanical boom extensions, the loads shown on the charts need to be reduced by the weight of these extensions.
Brochures
You are currently on the PALFINGER Europe page which shows the corresponding product assortment. We noticed that you come from a different location. Do you want to change to another PALFINGER country page?