Special

PK 22.001L TEC 7

Loader Crane

High outreach and high operating speed ensure efficient handling of construction material

Maximum radius of action thanks to slewing angle of 440 degrees
Optimized lubrication of the slewing mechanism thanks to an oil bath right up to the head bearing
Avoiding damage of the hydraulic hoses and compact set-up dimensions thanks to the new internal hose guiding system
Excellent visibility and high operator comfort thanks to new top seat with new joystick control
More lifting capacity thanks to S-HPLS and high operator friendliness thanks to PALcom P7 (PK 22.001L TEC 7 and PK 26.001L TEC 7)

Downloads Technical Data

Perfection in Action

Max. lifting moment	21.8 mt
Max. lifting capacity	5650 kg
Max. hydraulic outreach	13.7 m
Slewing angle	440°
Slewing torque	2.6 mt
Stabilizer spread (std)	6.6 m
Max. operating pressure	370 bar
Recommended pump capacity Top seat PVG32 LS	85 - 110 l/min
Dead weight (std)	2315 kg

Cranes shown in the leaflet are partially optional equipped and do not always correspond to the standard version.
Country-specific regulations must be observed. Dimensions may vary. Subject to technical changes, errors and translation mistakes.

	Lifting moment (mt)	Outreach (m)	Slewing angle (°)	Slewing torque (mt)	Pressure (MPa)	Pump capacity (l/min)	Crane Weight (kg)	Crane Height (mm)	Crane Width (mm)	Installation Width (mm)
Std	21.8	8.5	440	2.6	37.0	65-110	2315	2430	2550	-
A	21.1	11.1	440	2.6	37.0	65-110	2490	2430	2550	-
B	20.5	13.7	440	2.6	37.0	65-110	2650	2430	2550	-

The outreaches stated are with a boom angle of 20° and are therefore not the maximum. When using mechanical boom extensions, the loads shown on the charts need to be reduced by the weight of these extensions.