Special

PK 23.001L TEC 3

Loader Crane

High outreach and high operating speed ensure efficient handling of construction material

Maximum radius of action thanks to slewing angle of 440 degrees
Optimized lubrication of the slewing mechanism thanks to an oil bath right up to the head bearing
Avoiding damage of the hydraulic hoses and compact set-up dimensions thanks to the new internal hose guiding system
Excellent visibility and high operator comfort thanks to new top seat with new joystick control

Downloads Technical Data

Perfection in Action

Max. lifting moment	22.9 mt
Max. lifting capacity	5650 kg
Max. hydraulic outreach	16.3 m
Slewing angle	440°
Slewing torque	2.7 mt
Stabilizer spread (std)	6.6 m
Max. operating pressure	340 bar
Recommended pump capacity Top seat RSQ240	50 - 70 l/min
Recommended pump capacity Top seat RSQ240 LS	65 - 90 l/min
Recommended pump capacity Top seat PVG32 Radio	85 - 110 l/min
Dead weight (std)	2700 kg

Cranes shown in the leaflet are partially optional equipped and do not always correspond to the standard version.
Country-specific regulations must be observed. Dimensions may vary. Subject to technical changes, errors and translation mistakes.

	Lifting moment (mt)	Outreach (m)	Slewing angle (°)	Slewing torque (mt)	Pressure (MPa)	Pump capacity (l/min)	Crane Weight (kg)	Crane Height (mm)	Crane Width (mm)	Installation Width (mm)
A	22.2	11.1	440	2.7	34.0	50-110	2700	2430	2550	-
B	21.6	13.7	440	2.7	34.0	50-110	2865	2430	2550	-
C	21.0	16.3	440	2.7	34.0	50-110	3020	2430	2550	-

The outreaches stated are with a boom angle of 20° and are therefore not the maximum. When using mechanical boom extensions, the loads shown on the charts need to be reduced by the weight of these extensions.