Special

PK 23501-W

Loader Crane

THE SPECIALIST FOR EFFICIENT WASTE, SCRAP, AND RECYCLING CONTAINER SYSTEMS

The PK 23501 W is the answer to the specific needs of inner city waste management companies. A lot of attention was paid to the design of the knuckle boom, where the extension cylinders are mounted inside the boom.

Very low knuckle boom height prevents damage to the extension system
Perfect for loading- and unloading of underground waste containers
Perfect appearance and the highest value retention thanks to KTL
Fast job completion duet to high speed extension system
High operator friendliness thanks to radio remote control

Downloads Technical Data

HPSC-Plus LOAD

PALFINGER has further developed the proved stability system HPSC and offers application oriented additional functions in a modular system. One of the modules of this HPSC-Plus concept is HPSC-Plus LOAD. It reacts to the loading condition of the truck and calculates on the basis of the inclination the maximum load limit suitable for the respective situation.

Details

Technical data
Lifting capacities

Max. lifting moment	22.1 mt
Max. lifting capacity	4000 kg
Max. hydraulic outreach	10.2 m
Slewing angle	400°
Slewing torque	2.8 mt
Stabilizer spread (std)	5.0m
Width folded	2.55 m
Max. operating pressure	300 bar
Pump capacity	65 - 90 l/min
Dead weight (std)	2974 kg

Cranes shown in the leaflet are partially optional equipped and do not always correspond to the standard version.
Country-specific regulations must be observed. Dimensions may vary. Subject to technical changes, errors and translation mistakes.

	Lifting moment (mt)	Outreach (m)	Slewing angle (°)	Slewing torque (mt)	Pressure (MPa)	Pump capacity (l/min)	Crane Weight (kg)	Crane Height (mm)	Crane Width (mm)	Installation Width (mm)
B	22.1	10.2	400	2.8	30.0	65-90	2974	2670	2550	906

The outreaches stated are with a boom angle of 20° and are therefore not the maximum. When using mechanical boom extensions, the loads shown on the charts need to be reduced by the weight of these extensions.