Medium

PK 245 TEC

Loader Crane

More intelligent operation with PALTRONIC 180 control electronics
Very stiff and light boom system thanks to P-Profile
High user friendliness due to in-house developed radio remote control PALcom P7
Maximum utilisation of the working range thanks to extended HPSC
More lifting power due to S-HPLS
Practical and attractive due to Functional Design

P-Fold

P-Fold is a PALFINGER assistance system. It makes folding and unfolding an easy job for the operator. The P-Fold system also works in combination with the innovative RTC (Rope Tension Control). Both systems perfectly support the crane’s set-up processes and thus reduce set-up times to a minimum.

Details

Lane Lock

Maximum Safety – The new LANE LOCK feature for your loader crane

Effectively prevent unwanted slewing into dangerous areas such as oncoming traffic or other hazardous zones with the innovative LANE LOCK assistance function. Use the menu to activate a preset lock that reliably limits your loader crane‘s slewing range. Thanks to flexible adaptation to your vehicle‘s design and easy operation, you maintain full control at all times – for enhanced safety and precision on every job site.

Send request

Slewing Lock

Custom locking zones – Limitation with the new SLEWING LOCK function

Maintain full control over your loader crane and specifically block unauthorized slewing areas. With the SLEWING LOCK function, you can set custom angles to safely block dangerous zones. Simply define two points via the remote control to set the restricted area – for maximum control and safety, no matter where your vehicle is positioned.

Send request

Boom Release Assist

Reliable Protection During Unfolding – The new BOOM RELEASE ASSIST function

Avoid unnecessary damage and costs caused by improper operation when unfolding the loader crane. With the BOOM RELEASE ASSIST function, your loader crane automatically ensures that the knuckle boom is always pre-tensioned before the main boom can be moved. The locking function remains active until a predefined angle value of the main arm is reached – ensuring maximum safety and smooth operation. Once activated, BOOM RELEASE ASSIST provides reliable protection during every operation.

Send request

PALTRONIC 180

The PALTRONIC 180 is the most advanced control electronics for our loader cranes, enabling a safe, precise, and reliable operation. With its state-of-the-art technology, it allows for a variety of innovative assistance systems, such as Memory Position or the Leveling Assistant, and sets the standard for the new TEC generation.

Details

RTC

The new RTC (Rope Tension Control) system is an automatic rope tensioning device that helps to fold and unfold the crane. This is a further innovation from PALFINGER that will significantly shorten the set-up time.

Details

Technical data
Lifting capacities

Max. lifting moment	23.5 mt
Max. lifting capacity	7100 kg
Max. hydraulic outreach	20.0 m
Slewing angle	408°
Slewing torque	2.5 mt
Stabilizer spread (std)	5.6 m
Fitting space required (std)	1.05 m
Width folded	2.55 m
Max. operating pressure	385 bar
Pump capacity	80 - 100 l/min
Dead weight (std)	2420 kg

Cranes shown in the leaflet are partially optional equipped and do not always correspond to the standard version.
Country-specific regulations must be observed. Dimensions may vary. Subject to technical changes, errors and translation mistakes.

	Lifting moment (mt)	Outreach (m)	Slewing angle (°)	Slewing torque (mt)	Pressure (MPa)	Pump capacity (l/min)	Crane Weight (kg)	Crane Height (mm)	Crane Width (mm)	Installation Width (mm)
A	22.8	8.4	408°	2.5	38.5	80 - 100 l/min	2420	2380	2550	1050
B	22.4	10.6	408°	2.5	38.5	80 - 100 l/min	2570	2380	2550	1050
C	21.9	13.0	408°	2.5	38.5	80 - 100 l/min	2700	2380	2550	1050
D	21.4	15.3	408°	2.5	38.5	80 - 100 l/min	2850	2380	2550	1050
E	21.0	17.6	408°	2.5	38.5	80 - 100 l/min	2980	2380	2550	1050
F	20.6	20.0	408°	2.5	38.5	80 - 100 l/min	3100	2380	2550	1110

The outreaches stated are with a boom angle of 20° and are therefore not the maximum. When using mechanical boom extensions, the loads shown on the charts need to be reduced by the weight of these extensions.